cancel
Showing results for 
Search instead for 
Did you mean: 
dimikhan
Mission Specialist
Mission Specialist
  • 25.2K Views

Booting the exam environment stuck after showing 100%

I have created the bootable usb and able to boot my lenovo thinkpad with that. I had to turn off the secure boot option from BIOS to be able to boot. But while loading the exam environment it gets stuck at the end. I can see the big redhat icon in the middle of the screen and 100% loading status at the top-right corner. But can not move from this screen. No setting page comes as it mentioned in the exam preparation document.
Labels (1)
65 Replies
krishnadevanur
Mission Specialist
Mission Specialist
  • 2,528 Views

I an having the same issue. Were you able to find a fix?
krishnadevanur
Mission Specialist
Mission Specialist
  • 2,522 Views

I am using dell g15
krishnadevanur
Mission Specialist
Mission Specialist
  • 2,510 Views

I tried booting with the exam usb in a laptop without dedicated graphics card, worked out fine
PetrCihlar
Moderator
Moderator
  • 2,483 Views

yes. ". I went into the BIOS and under -> Display, I selected 'Hybrid Graphics' instead of 'Discrete Graphics'. This allowed Fedora to boot.."
Some computers allow you to switch the Video card and it may resolve the issue

Petr Cihlar
krishnadevanur
Mission Specialist
Mission Specialist
  • 2,473 Views

@PetrCihlar  Thank you very much for this tip. It worked on my G15 as well

Betz_
Cadet
Cadet
  • 2,600 Views

Just to confirm, I have a test 3 days from now. I have had the same boot issue with the usb getting stuck at "100 percent redhat environment" I recieved confirmation that older iso provided above is still valid. here is a link to the chat with a redhat help desk I had today. https://safe.menlosecurity.com/doc/docview/viewer/docN9724A5E0DE4Eab3cdaccf38d8e1a313019c45d8386de73.... I hope this helps. thanks

krishnadevanur
Mission Specialist
Mission Specialist
  • 2,488 Views

I was not getting stuck at 100% but at the DELL logo during startup, I switched to a laptop with older specs and it worked fine
0 Kudos
piyushgaur123
Mission Specialist
Mission Specialist
  • 1,972 Views

I'm using MacOS and trying to create a bootable USB for it. However, when I try to boot from it, it is not detected at all. I have followed the method provided in the guide.

System Information

Hardware Overview:

Model Name: MacBook Pro
Model Identifier: MacBookPro16,1
Processor Name: 6-Core Intel Core i7
Processor Speed: 2.6 GHz
Number of Processors: 1
Total Number of Cores: 6
L2 Cache (per Core): 256 KB
L3 Cache: 12 MB
Hyper-Threading Technology: Enabled
Memory: 16 GB
System Firmware Version: 1968.120.12.0.0 (iBridge: 20.16.5060.0.0,0)
OS Loader Version: 577~170
Serial Number (system): C02CF9CDMD6M
Hardware UUID: 8830E8D4-06F6-5884-AEFF-DFA5874BC065
Provisioning UDID: 8830E8D4-06F6-5884-AEFF-DFA5874BC065
Activation Lock Status: Disabled

 

0 Kudos
Keerthy
Moderator
Moderator
  • 1,965 Views

Hello @piyushgaur123 

If the USB is not detected, it could be due to several reasons:

1. Due to Secure boot settings in Startup Security Utility

- These settings will make sure that your Mac always starts up from a legitimate, trusted operating system. 

2. Allowed Boot media 

- This feature is used to control whether your Mac can start up from external or removable media.

3. The latest M1 chipset-based Mac computers may have compatibility issues with booting externally from the Fedora Workstation operating system and its derivatives. To isolate the issue, you may test the prepared USB on a different system(if available). 

We have the new version of ISO released, you may test this if it is not the one which you have downloaded already.

 https://static.redhat.com/downloads/training-certification/rhrexboot.iso

 

 

Hope it helps!

0 Kudos
piyushgaur123
Mission Specialist
Mission Specialist
  • 1,963 Views

I have changed the security settings from full to no. After multiple tries, it worked after using Fedora Media Writer for MacOS.

However, it doesn't detect wifi drivers. The Mouse and Keyboard also don't work. I had an external mouse connected which was working. 

IMHO this is really problematic and exam environments should be easier to access and doesn't have to be this complicated. 

0 Kudos
Join the discussion
You must log in to join this conversation.