cancel
Showing results for 
Search instead for 
Did you mean: 
jnmalledo
Mission Specialist
Mission Specialist
  • 1,530 Views

Unable to boot remote exam live ISO USB

Jump to solution

Hi,

This is a “remake” of the @Ole 2021 post "Cannot Boot Remote Exam Live ISO USB for Remote Exam, Boot hanging at 100" that I read thoroughly. I recently purchased a mini pc for space reasons, a “MaxMini B6 Power” to be more specific, with the following features

CPU: Intel® 10th Gen Core™ i7-1060NG7, Turbo Frequency 3.8GHz 
GPU: Intel® Iris® Plus Graphics
Memory: 16GB
Storage: 1TB SSD

I’m using the rhrexboot-2023-06.iso, and I’m experiencing the same issue, so I quote OP comment:

“The boot process is starting until the screen "environment is loading into memory" appears, it counts up to 100% and then nothing more is happening“.

Actually, in my case, screen goes black (and eventually monitor loses signal, going into a sleep state) instead of showing the next feedback: a little red hat logo and a progress bar that completes in about 15 seconds, leading to a window asking if you want to configure disability features.

Not a single message is shown, so I have no clue of what’s happening

Sorry for reopening this post, it's because, I think the provided solution (using a previous version of the boot exam iso) doesn't apply in my case (a relatively new hardware), so is there a new image I can test? Is there anything I can check or do in order to use my mini pc for taking a remote exam?

Thanks in advance

Labels (1)
1 Solution

Accepted Solutions
carlos_arias
Moderator
Moderator
  • 1,470 Views

Hi there,

It seems like you are already using the latest version of the ISO. I guess that some driver is missing for the GPU, hence when the loading passes it stops responding to the running OS. I don't think switching to another monitor will work, but if you have another give it a try.

carlos_arias_0-1719221362884.png

In the end, I think you can only wait for a new release of the ISO that includes the corresponding drivers that make your miniPC compatible.

Best regards.

RHCA - Level III
Free software for free people

View solution in original post

9 Replies
carlos_arias
Moderator
Moderator
  • 1,471 Views

Hi there,

It seems like you are already using the latest version of the ISO. I guess that some driver is missing for the GPU, hence when the loading passes it stops responding to the running OS. I don't think switching to another monitor will work, but if you have another give it a try.

carlos_arias_0-1719221362884.png

In the end, I think you can only wait for a new release of the ISO that includes the corresponding drivers that make your miniPC compatible.

Best regards.

RHCA - Level III
Free software for free people
carlos_arias
Moderator
Moderator
  • 1,469 Views

Also, have a look at this thread:

https://learn.redhat.com/t5/General/Blank-screen-when-booting-Remote-Exam-ISO/m-p/43394#M8581

RHCA - Level III
Free software for free people
0 Kudos
Chetan_Tiwary_
Community Manager
Community Manager
  • 1,446 Views

@jnmalledo  you can always reach out to exam support for any help / guidance / official response in these matters : https://rhtapps.redhat.com/comments 
Please note that "Exam support link" ( https://rhtapps.redhat.com/comments ) is the official channel for raising support case and taking guidance/ help for anything related to exam. All other comments and suggestions are provisional.

PetrCihlar
Moderator
Moderator
  • 1,403 Views

the issue you are experiencing is related to video card (GPU) compatibility. You can get around it by using a different computer or changing video card, which might be difficult for a mini PC

Petr Cihlar
  • 1,366 Views

If the mini PC has more than one type of video output, HDMI and DisplayPort, for example, you could also try a different connector. While you'll obviously be using the same GPU, I've had problems with the system being able to set up one output and not another one on some hardware.

Definitely not a guarantee, but it's someting you can try with a wire you might already own.

PetrCihlar
Moderator
Moderator
  • 1,217 Views

Yes. This might surely help

Petr Cihlar
0 Kudos
jnmalledo
Mission Specialist
Mission Specialist
  • 1,004 Views

I want to post an update about this issue. Apparently there's a lot of problem with this particular hardware, regarding to the graphic adapter and the i915 video driver, making the  installation of any linux distribution a painful process.

So i'll keep using my old lenovo laptop for remote exams. Thank you all for your help!

For those interested, this is a linux mint forum in which this issue is widely discussed

https://forums.linuxmint.com/viewtopic.php?t=412726#google_vignette

  • 905 Views

same issue for me using an ACER aspire ( windows 8).. i have used this laptop to take several exam but now using the latest ISO, i can't boot from the iso. 

Environment is loading into memory at 100% and sitting there. 

does anyne has a link to the old iso? so i can give it a try. 20240729_092701.jpg

jnmalledo
Mission Specialist
Mission Specialist
  • 849 Views

Hi!

Did you check the BIOS UEFI settings for the USB device? I had the same issue with my old Lenovo laptop, and I solved it by changing this configuration on BIOS 

Join the discussion
You must log in to join this conversation.