.... to be creative ... why not to use a phone as an external webcam?
For example with a free app like DroidCam my phone is transformed in an excellent webcam.
The problem is that you need additional software installed on PC to use phone as webcam. And I suspect that exam ISO has no such software.
That is correct, it would be required software -and drivers-.
Anyway, the presence of the smartphone itself is not allowed. And yes, the exam ISO (or Remote Exam Live environment) most likely don't have that, on purpose.
I hope that clarifies,
Hi @AngeloRimoldi ,
We would have to be creative, respecting the rules and requirements...
Use of or access to the following items or any similar items within your workspace during the exam is prohibited:
That means that using a phone as an external webcam is not allowed.
Thanks for your revert. Would it be possible to get clarity, whether we can use a separate USB microphone, as this seems to be a major stumbling block for most cheap Webcams.
I am not able to boot off of the USB.
The ISO that I downloaded is called rhrexboot.iso, and its size is only about 1.2 or 1.3Gb. I was led to expect a size of over 4Gb? So this is a surprise.
When I attempt to boot my laptop (Lenovo P50 running RHEL 7.8), I can get into the boot menu and the USB is available to choose. But it won't boot off of it. I just wind up in a boot loop: F12, boot menu, choose the USB, hit enter, blank screen, F12, boot menu, choose the USB, hit enter, blank screen, over and over.
I also have an Intl NUK as a desktop running Ubuntu. On that machine, the USB is #1 in the boot order, so I don't have to do anything special, it tries to boot off the USB right away. I wind up at a grub prompt. If I enter boot, it says that there's no kernel loaded.
(This almost feels like part of the test! :-)
How do I resolve this? Is the 1.2 Gb ISO file that I have, the correct one? It's from the static dot RedHat dotcom downloads/training-certification site.
Found a workaround on the Intel NUK desktop.
I have *not* solved the issue. And did not find a workaround on my laptop, the Lenovo P50 running RHEL 7 that went into the boot loop. But I *did* find a solution on the Intel NUK which gave me the grub prompt.
At the grub prompt, issue these commands:
Then the machine will proceed. At one point it will offer you a choice of boot environments, and default to one, and start to boot that environment. Looks like it might be looping but no, it gets to the RH Test environment.
Anyone who runs into the same issue, your correct choice for root location might not match mine. At the initial grub prompt, run an ls. You should see a list of "devices" to choose from. The list will something like this:
(hd0) (hd0,msdos1,apple2) (hd0,msdos1,apple1) (hd1) (hd1,gpt1) (hd1,gpt2) (hd1,gpt2)
That's about what my list looked like. The listing is conceptually similar to what you'd see with an lsblk command:
deviceX, deviceXpart1, deviceXpart2, deviceY, deviceYpart1, etc.
You probably *don't* want the "device" (the hd entry without a comma-separated second parameter). You want a partition. You can figure out which by listing it:
Note the trailing slash. That accesses the "root" of that partition's filesystem. Check them until you find the one that lists "EFI". That's your Red Hat ISO. Then:
See if you can find your appropriate *.efi file. That's the path you use in the chainloader command, and the device is what you set root to.
Note my desktop had the USB as #1 in the boot order, so for me the flash drive was hd0. Your boot order might be different. Also, for some reason the Red Hat iso showed up as hd0,msdos1,apple1) , which what the heck? But grub did not like the third parameter in the set root command. It worked as I wrote it above, pretending that the "apple" parameter was not even there.
Red Hat, it's absurd that I had to do this. It was your officially distributed ISO! And it didn't boot!
Also it did not match your description of it (you say it's 4Gb but it's only 1.2 or 1.3Gb). But I wouldn't have cared about that if the think would have booted.
You guys need to fix this. Is it an issue about classic BIOS vs UEFI?? Something else about my two devices??
This is an urgent issue for anyone testing remotely.
Hi @JimHardy ,
First thank you for your feedback, it's good that you can voice your concerns, and that someone listen to them. I'm going to try helping you.
First, for the context, the Remote Exams are rather new, they were released for the first time in 4th August 2020. Not going into details, some I don't even know myself to ensure integrity, it has to be some secure environment. Red Hat switched from a testing environment using KIOSK, some sort of laptop with identical specification worldwide, to opening them on a very high amount of hardware, again worldwide. Basically most customers won't even have the same setup, the same hardware, etc... Unfortunately that means that we can expect some setup related issues at some point. Having said that, it worked properly for many customers, I passed one exam myself on a T480S from Lenovo, and I have seen positive feedback from various other configurations. In other words, many candidates were able to attend their certification exams remotely, using that newly released Remote Exam live environment.
Second, for your intel NUC setup, I would say that you found a workaround, not a solution. The customers are not expected to have to do what you did in order to make it work, that is too technical for various users. Without knowing all of your setup, it seems difficult to explain you what possibly went wrong, certainly something did.
Third, the information you have appears definitely incorrect:
"it did not match your description of it (you say it's 4Gb but it's only 1.2 or 1.3Gb)"
Nothing said the iso size is 4GB and/or 1.2GB.
Having said that, like I explained, the user should be able to verify file integrity by using checksum, something we reported and will be looked at by the team.
Let me show you again, from the official source:
Hard Drive: A hard drive with free storage capacity of at least 4 GB (for Live USB creation only).
Nothing says the iso file is 4GB. It says there should be at least 4GB free on the hard drive of the computer used to flash the .iso file.
1. Download the Remote Exam Bootable Live USB from here and save it in the local hard drive.
Again, the size is not given. As I said there is a limitation here, users should be able to verify the file integrity after it's downloaded.
Going further, I invite you to provide your feedback here, that will be directed to the relevant team:
We can also try to identify what is happening on a technical level, on a discussion basis in this forum. For example, if you can provide details of your USB key, that would be a start.
@shefeeqyr can also help, maybe there is a known issue with P50 laptops, currently not fixed?
We are not aware of any known issue with Lenovo P50s yet. I will however check if support tickets were raised by other candidates using P50s.
Publishing the checksum of each remote exam live USB image release is something that is being considered. I don't have a timeline for this at this point though.
Size of the image can vary between each releases and we have set a requirement of a USB drive of 8 GB and above. We did have a 4.2 GB image briefly, but was pulled back as it needed a bit more work.
If the steps followed in the instructions document do not produce the desired results, it could be broadly due to a) an incomplete/failed ISO to USB write process or b) Incompatibility between the candidate's hardware and the remote exam live USB.
I would totally avoid advising customers to do troubleshooting at a grub/bootloader level to resolve it for the risk of breaking something else in the process. You can try a different laptop/desktop, try to write the ISO another time, from a different computer/operating system etc. For instance, we recommend using Fedora Media Writer to create a live usb in Fedora or Windows. Fedora Media Writer returns a success message if everything went fine.
In a worse case scenario of incompatibility and lack of alternative computers, candidates have an option to switch their exam eligibility between two modalities - Remote Exam and Testing Center (conventional Kiosks at partner locations), as long as you reschedule at least 24 hours before the exam start time.