The requirement is simplified now and hence only one external webcam with about a meter of cable length is expected. Nevertheless, lack of clarity and field of vision can be a limiting factor. If you are using this with a desktop computer and monitor as the only source of video feeds, then 480p with a narrow field of vision may hamper the Proctor's ability to monitor the exam.
Would you be using this Webcam along with a laptop that already has an integrated webcam instead?
If the answer is yes, then try running the remote exam compatibility test and ensure that both integrated webcam and external webcam are sending feeds. Seeing a video feed from both cameras during the test is important as the compatibility test looks for the presence of only one webcam and it can throw a false success message by detecting the integrated webcam.
In the above setup where If both your integrated webcam and one external webcam are sending feeds, then that can be used to compensate for the reduced field of vision of the external webcam. It's a matter of positioning the laptop screen and webcam in a way that let's the Proctor cover an acceptable view of your surroundings.
Another important factor: The Proctor should be able to read the text in your ID card for initial verification. We have noticed that some external webcams and laptop's integrated webcams fail to adjust their focus automatically to make ID card texts readable. A practical way to test this would be to use the webcam in your laptop's operating system, open a camera application or webconferencing client, turn on self-view, hold the id card close to the camera and check if you can read the contents. In the case of both integrated and external cameras detected in the compatibility test, a clear view of your ID from either of the cameras will be acceptable.
Hope these suggestions help.
Hi, yes the external camera will be used in conjunction with a T580 with a built-in webcam.
Thank you for the quick reply.
I have been studying and preparing for the RedHat EX200 Based on Rhel 7 and about 3 weeks ago scheduled to take the remote exam when it was made available because all the testing centers around me were all closed and not available for in center testing.
So on the day of my remote exam i logged in 5 minutes early and did all the required checks with the proctor and the exam started but about 30mins into the exam there was a power outage due to the fires in California and lost my network. The power later came back on but i didnt want to take the chance so i asked to reschedule and i was able to reschedule.
The second attempt at remote exam and this time my network kept flunctuating and being unstable even though everything passed during the compatibility test. Again, thankfully the Redhat team were really helpful with helping me reschedule.
So with all my experience with remote testing i decided to see if the centers are not accepting in person exams and waaalaaaaaah! i found an appointment but its not till October 6th. My only concern is that on the RedHat website it says that Exams based on Redhat 7 will be available until October 1, 2020.
Now i am concerned i will have to learn Rhel8. Will the objectives change as well?
Will i still be able to take the Exam based on Rhel 7 since that is what i scheduled?
Please help with any information.
Hi @Sam_Akpan ,
The date mentioned in the website refers to the last date the EX200 REHL 7 exam will be available for purchase. If you have already purchased the exam and have an exam voucher, it is valid for one year from the date of purchase and can be scheduled and taken at any point prior to its expiration.
Hope that helps.
Hi I want to take exams in Japan by remote. I scheduled an exam last week.
Then I want to take another exam. But now, my Red Hat Exam Scheduler shows there is no available schedule.
Why there is no available schedule? If there any action I must do?
Hi @Yusuke_Y ,
There seems to be greater demand for exams recently and slots for the next few days may have already been occupied.
Please see to this comment for details - https://learn.redhat.com/t5/General/Questions-about-getting-ready-for-your-Red-Hat-remote-exam/m-p/1...
for RHCSA Remote exam : I have only two usb ports in my laptop but there is three needed, one for pendrive ,one for wired mouse and one for webcam so multiple usb hub is allowed or not..
Hi @krati ,
A USB hub is allowed for the remote exam.
Here is the quote from the Getting Ready document under system requirements.
USB Hub : One wired USB hub is allowed if a hub is needed to accommodate
permitted peripheral devices.
The last time I had the exam I had a bad experience with the font size in the RHCSA exam, and I tried to zoom in multiple different ways, nothing happened. How can I relay this message to the people who are responsible for the exam.
Please raise a ticket at https://rhtapps.redhat.com/comments/
Try to be as descriptive as possible in terms of the issue you faced, what steps were taken to mitigate this and the details of your exam such as date, your redhat.com id etc. This will help in capturing your feedback.